Marshall Engineering
A.B.N. 60 092 308 882
Menu
DIY Single Axle Kits
Unbraked Offroad Single Axle Kit
1.4 Tonne Mechanical Disc Brake Kit
1.4 Tonne Mechanical Drum Brake Kit
NOTE - see Assembly Tips Page for helpful hints on construction
Suits all Trailers up to 5' Frame Width
(customer assembles / packs bearings)
KIT CONTAINS
-
1 ea 39mm Round Axle 750kg Rated (customer to specify length))
-
2 ea Hubs Complete (customer to specify stud pattern)
-
2 ea 5 Leaf 45mm wide Eye/Slipper Springs (750kg rated per pair)
-
1 ea Spring Fitting Kit suit 39mm Round Axle
-
1 ea 3 Hole Quick Release 50mm Coupling
-
1 ea 3 Hole Coupling Plate
-
3 ea 1/2" BSW x 1-1/2" Bolts / Nuts / Spring Washers
-
1 ea Assembly Instructions
|
PRICE
|
|
| Kit as described to suit Holden or Ford pattern wheels | $200.00 (inc. GST) |
|
OPTIONS |
ADD |
| 1.0T 7 Leaf Eye Slipper Springs in lieu 5 Leaf | $21.00 |
| 1.0T 40mm Square Axle in lieu of 39mm Round | $25.00 |
| Overlay Axle (only available with 1.0T axle option) | $60.00 |
| Drop Axle 2 1/2" or 4" Drop (only available with 1.0T axle option) | $95.00 |
| Landcruiser 6 Stud Hubs in lieu of Ford/Holden Hubs | $30.00 |
| Axle Assembly | $45.00 |
|
Kit Weight approx 40kg |
 |
D.I.Y Unbraked Offroad Single Axle Kit
Suits all Trailers up to a maximum 5' Frame Width & L/C 6 Stud Hubs
(customer assembles / packs bearing)
KIT CONTAINS
-
1 ea 1.4T 45mm Square Axle (customer to specify length))
-
2 ea 5 Leaf 60mm wide Eye/Eye Springs (1000kg Capacity)
-
1 ea Single Axle 60mm Wide Spring Fitting Kit suit 45mm Square Axle
-
2 ea Landcruiser 6 Stud Hubs Complete - SL Bearings
-
1 ea 2.0T Rated 360 degree Swivel Offroad Coupling
|
PRICE
|
|
| Kit as described suit L/C 15 / 16" Wheels | $499.00 (inc. GST) |
|
OPTIONS |
ADD |
| Overlay Axle (drops ride height 45mm) | $60.00 |
| Drop Axle 2 1/2" or 4" Drop | $95.00 |
| E & E 60mm x 7 Leaf Offroad Spring Kit - Rebound Springs, HT U-Bolts, Greaser Bolts - 1500kg Rated | $180.00 |
| L/C 100 Series 5 Stud Hubs with 9/16" Studs in lieu of L/C 6 Stud Hubs | $40.00 |
| Axle Assembly | $45.00 |
|
NOTE: As kit is unbraked Gross Weight of Trailer Load is Restricted
to 750kg Maximum. Kit Weight approx 80kg |
|
D.I.Y 1.4 Tonne Hydraulic Brake Single Axle Kit
(customer assembles / packs bearings/ weld flanges/ run brake lines)
KIT CONTAINS
-
1 ea 1.4T 45mm Square Axle (customer to specify length)
-
2 ea 9 Leaf 45mm wide Eye / Slipper springs
-
1 ea Single Axle E/S Spring Fitting Kit - suit 45mm Sq Axle
-
2 ea 9" Hubdrums Complete - SL Bearings (customer to specify pattern)
-
1 pr Hydraulic Brake Assemblies (1 LH / 1 RH)
-
1 ea Hydraulic Brake Flange Kit suit 45mm Sq Axle (c/w Bolt, Nut/Washer)
-
1 ea 2.0T Hydraulic Override Coupling (c/w 3/4" Master Cylinder)
-
1 ea Hydraulic Brake Fitting Kit
-
1 ea 6 Mtr Coil 3/16" Bundy Tube
|
PRICE
|
|
| Kit as described to suit Holden or Ford pattern wheels | $640.00 (inc. GST) |
| Kit to suit Landcruiser 6 stud wheels | $661.00 (inc.GST) |
|
OPTIONS |
ADD |
| Overlay Axle | $60.00 |
| Drop Axle 2-1/2" or 4" | $95.00 |
| 60mm x 7 Leaf E&E Springs & Fittings (in lieu of E/S Springs) | $60.00 |
| E&E Offroad Spring Kit - Rebound Springs 5/8" dia U-Bolts (in lieu of E&S Springs) | $180.00 |
| 2.0T Polyblock Hydraulic Override Coupling (in lieu of STD Override Coupling) | $210.00 |
| Axle Assembly (if required) | $130.0 |
|
Kit Weight approx 100kg |
|
D.I.Y 1.4 Tonne Electric Brake Single Axle Kit
(customer assembles / packs bearings/ weld flanges )
KIT CONTAINS
-
1 ea 1.4T 45mm Square Axle (customer to specify length)
-
2 ea 9 Leaf 45mm wide Eye / Slipper springs
-
1 ea Single Axle E/S Spring Fitting Kit - suit 45mm Sq Axle
-
2 ea 10" Electric Hubdrums Complete - S/L Bearings (customer to specify pattern)
-
1 pr 10" x 2-1/4" Electric Brake Assemblies (1 LH / 1 RH)
-
1 ea Electric Brake Flange Kit suit 45mm Sq Axle (c/w Nut / Washer)
-
1 ea 3.5T 50mm Electric Brake Coupling
-
1 ea Cable Adjuster
-
1 ea 10 Mtr Roll 4mm Winching Cable
-
2 ea 4mm Cable Clip
|
PRICE
|
|
| Kit as described to suit Holden or Ford pattern wheels | $715.00 (inc. GST) |
| Kit to suit Landcruiser 6 stud wheels | $750.00 (inc.GST) |
|
OPTIONS |
ADD |
| Overlay Axle | $60.00 |
| Drop Axle 2-1/2" or 4" | $95.00 |
| 60mm x 7 Leaf E&E Springs & Fittings (in lieu of E/S Springs) | $60.00 |
| E&E Offroad Spring Kit - Rebound Springs 5/8" dia U-Bolts (in lieu of E&S Springs) | $180.00 |
| 2.0T Rated 360 degree Swivel Offroad Coupling - No Handbrake Facility (in lieu of 3.5T Electric Coupling) | $50.00 |
| Alko "Off Road" 10" Electric Brake Assemblies (in lieu Std) | $120.00 |
| Electric Brake Controller | $125.00 |
| Axle Assembly (if required) | $90.00 |
|
Kit Weight approx 100kg |
|
D.I.Y 1.4 Tonne Mechanical Disc Brake Single Axle Kit
(customer assembles / packs bearings/ weld flanges )
KIT CONTAINS
-
1 ea 1.4T 45mm Square Axle (customer to specify length)
-
2 ea 9 Leaf 45mm wide Eye / Slipper springs
-
1 ea Single Axle E/S Spring Fitting Kit - suit 45mm Sq Axle
-
2 ea 1/2" Hubdiscs Complete SL Bearings (customer to specify pattern)
-
1 pr Mechanical Disc Brake Assemblies (1 LH / 1 RH)
-
1 ea Disc Brake Flanges suit 45mm sq Axles
-
1 ea 2.0T Mechanical Override Coupling (with actuator to suit drawbar specified)
-
1 ea Cable Adjuster
-
1 ea 10 Mtr Roll 4mm Winching Cable
-
4 ea 4mm Cable Clip
|
PRICE
|
|
| Kit as described to suit Holden or Ford pattern wheels (13" / 14" / 15" wheels) | $640.00 (inc. GST) |
| Kit as described to suit L/C 6 Stud | $800.00 (inc GST) |
|
OPTIONS |
ADD |
| Overlay Axles | $60.00 |
| Drop Axles 2-1/2" | $95.00 |
| 60mm x 7 Leaf E&E Springs (in lieu of E/S) | $60.00 |
| Eye & Eye Offroad Spring Kit (Rebound Springs, Greaser Bolts & 5/8" dia U-Bolts in lieu E/Slipper | $180.00 |
| 2.0T Polyblock Mechanical Over-ride Coupling in lieu Std | $190.00 |
| Axle Assembly (if required) | $95.00 |
|
NOTE: 4" Drop NOT available with Mechanical Disc |
|
|
Kit Weight approx 100kg |
|
D.I.Y 1.4 Tonne Mechanical Drum Brake Single Axle Kit
(customer assembles / packs bearings/ weld flanges )
KIT CONTAINS
-
1 ea 1.4T 45mm Square Axle (customer to specify length)
-
2 ea 9 Leaf 45mm wide Eye / Slipper springs
-
1 ea Single Axle E/S Spring Fitting Kit - suit 45mm Sq Axle
-
2 ea 9" Hubdrum Complete SL Bearings (customer to specify pattern)
-
1 pr Mechanical Drum Brake Assemblies (1 LH / 1 RH)
-
1 ea Mechanical Drum Brake Flanges suit 45mm sq Axles
-
1 ea 2.0T Mechanical Override Coupling (with actuator to suit drawbar specified)
-
1 ea Cable Adjuster
-
1 ea 10 Mtr Roll 4mm Winching Cable
-
4 ea 4mm Cable Clip
|
PRICE
|
|
| Kit as described to suit Holden or Ford pattern wheels (13" / 14" / 15" wheels) | $670.00 (inc. GST) |
| Kit as described to suit L/C 6 Stud | $690.00 (inc GST) |
|
OPTIONS |
ADD |
| Overlay Axles | $60.00 |
| Drop Axles 2-1/2" | $95.00 |
| 60mm x 7 Leaf E&E Springs (in lieu of E/S) | $60.00 |
| Eye & Eye Offroad Spring Kit -Rebound Springs, 5/8" Dia U-Bolts (in lieu std) | $180.00 |
| 2.0T Polyblock Mechanical Over-ride Coupling in lieu Std | $190.00 |
| Axle Assembly (if required) | $90.00 |
|
NOTE: 4" Drop NOT available with Mechanical Drum |
|
|
Kit Weight approx 100kg |
|