D.I.Y 2.0T 12' 2" x 6'6" Tandem Car Carrier Kit

"You just Weld it, Wire it and Paint it"

(Complete Trailer Kit less Wheels / Tyres / Paint)

Standard Trailer Kit Specifications

2000kg Gross
500kg Tare +/- (Tare weight will vary according to wheels/tyres used)
1500kg Load Capacity +/- (Load Capacity weight will vary according to wheels/tyres used)
2.5mtr Wide x 5.7mtr Length Overall
12'2" x 6'6" Overall Frame Size (3.7mtr x 1.98mtr)
12' x 6'4" Usable Internal Trailer Size (3.66mtr x 1.93mtr)
480mm Std Deck Height (using 185/65/14 tyres)
1.0T 40mm Square Axles
7 Leaf Eye/Slipper Springs
Hydraulic Override Brakes
Stow-Away Ramps @ 1800mm Long
Complete Light/Reflector Kit with Low line LED Clearance Lamps
100 x 50 x 5 RHS Drawbar
50 x 50 x 2.5 RHS Mainframe Bars
50 x 50 x 1.6 RHS Crossbars
50 x 25 x 2.0 RHS Truss
2.1mm Treadplate "V" Pressed Floor Rails
Clearance Relieved Rear Crossmember
Front and Rear Tie Downs
10mm Twin Safety Chains
Comprehensive Step by Step Instruction Manual with Photos

Std 2.0T Car Carrier Kit with Hubs- suit Ford/Holden Pattern Wheels $2850.00
 (inc GST) 
Mechanical Disc Brakes in lieu Hydraulic No Cost Option
Electric Brakes (in lieu of Hydraulic) $100.00
Electric Brake Controller $140.00
Tandem Rocker Roller Suspension (in lieu of eye/slipper) $220.00
1.4T 45mm Square Axles (in lieu of 40mm Sq) $140.00
11200kg 2 Speed Winch & Removable Mounting Bracket Assy $360.00
Swivel Plate Jockey Wheel $50.00
Overlay Axles (drops std ride height 40mm) $260.00

This Complete D.I.Y Car Carrier Kit was produced with the aim of providing a palletized kit form Car Trailer with the lightest possible tare weight whilst making no compromises on structural strength. Hence why 12' 2" was chosen as it is large enough to carry any normal (small to medium) passenger vehicle but short enoughto keep the dead weight of a longer frame to a minimum. We and many of our customers have put our own prototype of this trailer through intense use (and intentional abuse to test its capabilities!) and as a result we have produced the car carrier as described.


Copyright Marshall Engineering