"Marinized" 2.0T Hydraulic Disc Brake Tandem Kit

(customer assembles / packs bearings / welds flanges / runs brake lines)

Kit Contains

2 ea - 1.0T 40mm Square Axle
(customer to specify length)
4 ea - Galvanized 7 Leaf 45mm wide
Eye / Slipper springs
1 ea - Tandem Axle Spring Fitting Kit
suit 40mm Sq Axle with Galvanized U-Bolts,
Fish Plates, Axle Pads, Stainless Steel Spring Mount Bolts & Nyloc Nuts
2 ea - Galvanized Hubs complete
with Marine Seals
(customer to specify stud pattern)
2 ea - Galvanized 1/2" Hubdiscs Complete SL Bearings and Marine Seals
(customer to specify pattern)
2 pr - Chrome Bearing Buddies and Dust Covers
1 pr - Marinized Hydraulic Disc Brake Assemblies
(AL-KO Dacromet)
2 ea - Disc Brake Flanges suit 40mm sq Axles
1 ea - 2.0T Hydraulic Override Coupling
Zinc with 3/4" Master Cylinder
1 ea - Hydraulic Disc Brake Fitting Kit with stainless steel braided brake lines
1 ea - 6Mtr Coil 3/16" Bundy Tube
1 ea - Assembly Instructions

Kit as described to suit Holden or Ford pattern wheels
(13"/14"/15" wheels)
 (inc GST) 
Kit as described to suit L/C 6 Stud Pattern (Spread Bogey Fitting Kit) $1630.00
 (inc GST) 
Galvanized Tandem Rocker Springs in lieu E/Slipper $240.00
Weld flanges then Galvanize Axles in lieu Black $300.00
Overlay Axles $260.00
Drop Axles 2-1/2 inch or 4 inch $330.00
1.4T 45mm Square Axles in lieu 1.0T $140.00
Cranked Main Axle Beams (only available with overlay or drop axle option) $300.00
Galvanized Angle Iron Spring Mount Brackets in lieu Std Hangers $400.00
Weld brake flanges to axle only $100.00
Axle Assembly (if required) $230.00
All Brake Lines / Hoses and Fittings supplied but not fitted as recommended fittment is flexible hose from calipers to trailer frame.

Std Kit weight approx 160kg

Return to Menu

Copyright Marshall Engineering