"Marinized" 2.0T Mechanical Disc Brake Tandem Kit

(customer assembles / packs bearings / welds flanges)

Kit Contains

2 ea - 1.0T 40mm Square Axle
(customer to specify length)
4 ea - Galvanized 7 Leaf 45mm wide
Eye / Slipper Springs
1 ea - Tandem Spring Fitting Kit
suit 40mm Sq Axle with Galvanized U-Bolts,
Fish Plates, Axle Pads, Stainless Steel Spring Mount Bolts & Nyloc Nuts
2 ea - Galvanized Hubs Complete
with Marine Seals
(customer to specify pattern)
2 ea - Galvanized 1/2" Hubdiscs Complete with Marine Seals
(customer to specify pattern)
2 pr - Chrome Bearing Buddies & Dust Covers
1 pr - Galvanized Mechanical Disc Brakes Assemblies
(1 LH / 1 RH)
2 ea - Disc Brake Flanges suit 40mm sq Axles
1 ea - 2.0T Mechanical Override Coupling
Zinc (with actuator to suit drawbar specific)
1 ea - Cable Adjuster
1 ea - 10 Mtr Roll 4mm Winching Cable
4 ea - 4mm Cable Clip

Kit as detailed to suit Holden or Ford pattern wheels
(13"/14"/15" wheels)
 (inc GST) 
Kit as detailed to suit L/C 6 Stud Pattern (Spread Bogey Fitting Kit) $1420.00
 (inc GST) 
Galvanized Tandem Rocker Springs in lieu E/Slipper $240.00
Weld flanges then Galvanize Axles in lieu Black $300.00
Overlay Axles $260.00
Drop Axles 2-1/2 inch $330.00
Cranked Main Axle Beam (only available with overlay or drop axle option) $300.00
1.4T 45mm Sq Axles in lieu 1.0T $140.00
Galvanized Angle Iron Spring Mount Brackets in lieu Std Hangers $400.00
Axle Assembly (if required) $230.00
Weld brake flanges to axle only $100.00

4" Drop NOT available with Mechanical Disc

Std Kit weight approx 160kg

Return to Menu

Copyright Marshall Engineering